JKNV Energy

Call Us Today! 087 809 0432

JKNV Energy

Pre Paid Metering & Vending Solutions

Landis & Gyr Cashpower Three Phase Prepaid Meter

The Landis & Gyr Cashpower Three Phase Prepaid Meter is a four-wire 100 Amp per phase, keypad-based prepayment electricity meter in a compact housing.

The Landis & Gyr Cashpower Three Phase Prepaid Meter is a four-wire 100 Amp per phase, keypad-based prepayment electricity meter in a compact housing. The meter is suitable for residential, commercial and light industrial environments.

This unit is programmed to stop the flow of electricity once the prepaid credit is exhausted.  Recharge vouchers can be purchased at several convenient locations, including Pick n Pay, Checkers, Spar, BP Express Shops, Unipin outlets, FNB, Standard, ABSA and Nedbank Internet Banking.

We can install more than one meter per property and tenants can buy their electricity almost anywhere!  This, combined with the convenience to tenants, have made us the preferred prepaid water meters suppliers of landlords and property managers across Gauteng.

3 Phase Prepaid Meter Features

  • IEC62055-31 compliant
  • Maximum current of 100A per phase
  • Tamper detection
  • Compact meter design with British Standard layout
  • Easy to install and ideal for new reticulation as well as existing installations
  • Proven Cashpower keypad technology
  • Meter provides valuable information to help consumers effectively manage and budget their electricity consumption
  • Significant Reverse Energy (SRE) detection
  • Programmable software power limit
  • Advanced commissioning / decommissioning feature
  • Prepayment / Credit Mode
  • STS compliant
  • Large display with language-independent icons
  • High surge withstand capability for areas prone to lightning or other line surges
  • Can be installed as an integrated unit or in a split configuration

Get more information on How it Works.

Full Description of 3 Phase Prepaid Meter

The Cashpower Three Phase meter is a four-wire 100 Amp per phase, keypad-based prepayment meter in a compact British Standard housing. The meter is suitable for residential, commercial and light industrial environments. An optional local keypad and display can be fitted to the meter at the time of manufacture. The meter also features a dedicated diagnostic indicator which shows the status of communication to the remote customer interface unit. The meter boasts a large custom display and also features a host of standard Cashpower software features including the ability to operate as a prepayment meter or in credit metering mode.

We do also offer a 3 phase prepaid meter that is a four-wire 250 Amp per phase prepaid meter.  This is a special order mainly for industrial use, kindly complete an enquiry form and state if your requirement is above 100 Amp per phase.

Optical interface
As a standard feature, the Three Phase meter offers an IEC 62056-21 compliant optical communications port. This allows the utility to access a variety of information stored inside the meter and to upload it to a hand-held unit.

Tamper detection
The Cashpower 3 Phase prepaid meter is mechanically sealed against tampering through the use of  factory sealed plugs and optional sealing wires for the electronic enclosure. In addition the terminal cover can be sealed by standard utility seals.

The Cashpower Three Phase meter is equipped with a tamper sensor that will automatically disconnect the power to the load in the event of tampering.

Surge protection
The meter has been designed to have a surge voltage withstand that significantly exceeds the requirements of IEC 62052-11.

Remote Customer Interface Unit (keypad)

The meter has two parts, the prepayment meter and the customer interface unit. The meter is connected to the customer interface unit by a two-core communications wire up to a distance of 130 metres. The customer interface unit is compact with a user-friendly keypad and display. The meter also features a dedicated diagnostic indicator which shows the status of communication to the customer interface unit.

This meter can be installed in two different configurations. Either as an integrated (stand-alone unit) or in a split configuration with the addition of a separate keypad, whereby the meter would be in a locked enclosure and the tenants would have access to the keypad (customer interface unit) only. The option selected would depend on the electrical set up of the property and the needs of the property owner or manager.

In the split configuration, the meter is usually installed outside the rental unit in a secure, locked enclosure which should not be accessible to the tenant. This facilitates easy inspection by the property owner at any time and reduces the opportunity of fraud by tampering.

The customer interface unit is installed inside the consumer’s house in a convenient location. The communications interface can withstand voltage surges of 6kV, however it is recommended that one of the communication lines be earthed at the meter for additional protection.

The meter contains all critical metering, token decryption and load control functionality. It operates independently and is immune to any form of tampering on the Customer Interface Unit.

For more information, kindly complete the enquiry form.

Scroll to Top
0 Shares
Share
Share
Tweet
Pin